Hydraulic Pumps

Pumps are tested on our in house, 350 horse power test stand.  They are rotated to correct pump speed and pressured up to 5,000 PSI.  Charge pressure, pilot pressure, load sensor pressure and case flow are checked.  Horse power, brake pressure, maximum and minimum displacement are adjusted according to factory specifications.  And they are checked for leaks. 

Transmissions

Transmissions are tested for lube pressure, charge pressure, system pressure, torque pressure and flow.  They are rotated to correct rpm and shifted through all gears to check rate of shift and to check for slippage.

Rotary Manifolds

Rotary manifolds are mounted into our test stand, built specifically for fully testing them.  They are pressured, up to 3,000 PSI, rotated, and checked for internal and external leaks.

Differentials

Differentials are pressure checked for leaks in brake seals and diff lock mechanism.

*If your components are not tested before being installed on your tractor, then your tractor becomes the test stand.  You can install our components with confidence, knowing they are working properly. 

Click an Image to See a Larger View